Welcome to our websites!
OEM/ODM Factory Blasting Media - Sandblasting nozzle with boron carbide – Junda
OEM/ODM Factory Blasting Media - Sandblasting nozzle with boron carbide – Junda Detail:
Product Description
Boron carbide sand blasting nozzle is made of boron carbide material and formed by straight hole and Venturi hot pressing. It has been widely used in sand blasting and shot blasting equipment because of its high hardness, low density, high temperature resistance, good wear resistance and corrosion resistance.
Boron carbide nozzle characteristics
1. Longer service life. Boron carbide nozzle has the longest life for sand blasting and shot peening.
2. Lower cost: the service life outlast tungsten carbide by 3 times.
3. To reduce down time.
4. To maintain efficiency.
Technical Parameters
| Product name | Boron carbide sand blasting nozzle |
| Materials | Boron carbide |
| The available sand sand | Steel shot, black aluminum oxide, white aluminum oxide, brown aluminum oxide, glass sand, silicon carbide, glass beads, plastic granules. |
| The nozzle shape | Venturi nozzle |
| Density | ≥ 2.46 g/cm3 |
| Bending strength | ≥400 Mpa |
| Performance | High corrosion resistance |
| Model | Size (mm) | |||||
| High | Outer diameter | The inner diameter | On the wall thickness | The inner diameter | The wall thickness | |
| 6*20*35 | 35 | 20 | 6 | 7 | 14 | 3 |
| 8*20*35 | 35 | 20 | 8 | 6 | 14 | 3 |
| 10*20*35 | 35 | 20 | 10 | 5 | 14 | 3 |
| 6*20*45 | 45 | 20 | 6 | 7 | 14 | 3 |
| 8*20*45 | 45 | 20 | 8 | 6 | 14 | 3 |
| 10*20*45 | 45 | 20 | 10 | 5 | 14 | 3 |
| 6*20*60 | 60 | 20 | 6 | 7 | 14 | 3 |
| 8*20*60 | 60 | 20 | 8 | 6 | 14 | 3 |
| 10*20*60 | 60 | 20 | 10 | 5 | 14 | 3 |
| 6*20*80 | 80 | 20 | 6 | 7 | 14 | 3 |
| 8*20*80 | 80 | 20 | 8 | 6 | 14 | 3 |
| 10*20*80 | 80 | 20 | 10 | 5 | 14 | 3 |
Product detail pictures:
Related Product Guide:
It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for OEM/ODM Factory Blasting Media - Sandblasting nozzle with boron carbide – Junda , The product will supply to all over the world, such as: Israel, Egypt, Senegal, We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
By Jonathan from Islamabad - 2017.12.19 11:10
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Andrea from Malawi - 2018.12.30 10:21
Write your message here and send it to us
Products categories
-
Phone
-
E-mail
