China Factory for Alumina Powders - The hardest blasting medium Silicon Carbide Grit – Junda
China Factory for Alumina Powders - The hardest blasting medium Silicon Carbide Grit – Junda Detail:
Product Description
Junda Silicon Carbide Grit is the hardest blasting media available. This high-quality product is manufactured to a blocky, angular grain shape. This media will break down continuously resulting in sharp, cutting edges. The hardness of Silicon Carbide Grit allows for shorter blast times relative to softer medias.
Due to its stable chemical properties, high thermal conductivity, low thermal expansion coefficient, and good wear resistance, silicon carbide has many other uses besides being used as abrasives. For example, silicon carbide powder is applied to the impeller or cylinder of a water turbine by a special process. The inner wall can improve its wear resistance and prolong its service life by 1 to 2 times; the high-grade refractory material made of it has heat shock resistance, small size, light weight, high strength and good energy-saving effect. Low-grade silicon carbide (containing about 85% of SiC) is an excellent deoxidizer. It can speed up the steelmaking speed, and facilitate the control of chemical composition and improve the quality of steel. In addition, silicon carbide is also widely used to make silicon carbide rods for electric heating elements.
Silicon carbide has a very high hardness, with a Mohs hardness of 9.5, second only to the world’s hardest diamond (10). It has excellent thermal conductivity, is a semiconductor, and can resist oxidation at high temperatures.
Due to its stable chemical properties, high thermal conductivity, low thermal expansion coefficient, and good wear resistance, silicon carbide has many other uses besides being used as abrasives. For example, silicon carbide powder is applied to the impeller or cylinder of a water turbine by a special process. The inner wall can increase its wear resistance and prolong its service life by 1 to 2 times; the refractory material made of it has heat shock resistance, small size, light weight, high strength and good energy-saving effect. Low-grade silicon carbide (containing about 85% of SiC) is an excellent deoxidizer. It can speed up the steelmaking speed, and facilitate the control of chemical composition and improve the quality of steel. In addition, silicon carbide is also widely used to make silicon carbide rods for electric heating elements.
Technical Parameters
|
Silicon Carbide Grit Specifications |
|
|
Mesh Size |
Average Particle Size (the smaller the mesh number, the coarser the grit) |
|
8Mesh |
45% 8 mesh (2.3 mm) or larger |
|
10Mesh |
45% 10 mesh (2.0 mm) or larger |
|
12Mesh |
45% 12 mesh (1.7 mm) or larger |
|
14Mesh |
45% 14 mesh (1.4 mm) or larger |
|
16Mesh |
45% 16 mesh (1.2 mm) or larger |
|
20Mesh |
70% 20 mesh (0.85 mm) or larger |
|
22Mesh |
45% 20 mesh (0.85 mm) or larger |
|
24Mesh |
45% 25 mesh (0.7 mm) or larger |
|
30Mesh |
45% 30 mesh (0.56 mm) or larger |
|
36Mesh |
45% 35 mesh (0.48 mm) or larger |
|
40Mesh |
45% 40 mesh (0.42 mm) or larger |
|
46Mesh |
40% 45 mesh (0.35 mm) or larger |
|
54Mesh |
40% 50 mesh (0.33 mm) or larger |
|
60Mesh |
40% 60 mesh (0.25 mm) or larger |
|
70Mesh |
40% 70 mesh (0.21 mm) or larger |
|
80Mesh |
40% 80 mesh (0.17 mm) or larger |
|
90Mesh |
40% 100 mesh (0.15 mm) or larger |
|
100Mesh |
40% 120 mesh (0.12 mm) or larger |
|
120Mesh |
40% 140 mesh (0.10 mm) or larger |
|
150Mesh |
40% 200 mesh (0.08 mm) or larger |
|
180Mesh |
40% 230 mesh (0.06 mm) or larger |
|
220Mesh |
40% 270 mesh (0.046 mm) or larger |
|
240Mesh |
38% 325 mesh (0.037 mm) or larger |
|
280Mesh |
Median: 33.0-36.0 micron |
|
320Mesh |
Median: 26.3-29.2 micron |
|
360Mesh |
Median: 20.1-23.1 micron |
|
400Mesh |
Median: 15.5-17.5 micron |
|
500Mesh |
Median: 11.3-13.3 micron |
|
600Mesh |
Median: 8.0-10.0 micron |
|
800Mesh |
Median: 5.3-7.3 micron |
|
1000Mesh |
Median: 3.7-5.3 micron |
|
1200Mesh |
Median: 2.6-3.6 micron |
|
Product name |
Typical Physical Properties |
Proximate Chemical Analysis |
|||||||
|
Corn Cob Grit |
Color |
Grain Shape |
Magnetic Content |
Hardness |
Specific Gravity |
SiC |
98.58 % |
Fe |
0.11 % |
|
Black |
Angular |
0.2 – 0.5 % |
9.5 Mohs |
3.2 |
C |
0.05 % |
Al |
0.02 % |
|
|
Si |
0.80 % |
CaO |
0.03 % |
||||||
|
SiO2 |
0.30 % |
MgO |
0.05 % |
||||||
Product detail pictures:
Related Product Guide:
With our loaded practical experience and thoughtful solutions, we now have been identified for a trusted provider for numerous intercontinental consumers for China Factory for Alumina Powders - The hardest blasting medium Silicon Carbide Grit – Junda , The product will supply to all over the world, such as: Accra, Puerto Rico, Belgium, Welcome to visit our company, factory and our showroom where displays various hair products that will meet your expectation. Meanwhile, it is convenient to visit our website, and our sales staff will try their best to provide you the best service. Please contact us if you need more information. Our aim is to help customers realize their goals. We are making great efforts to achieve this win-win situation.
By Madeline from Kuwait - 2017.09.09 10:18
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Nelly from United Arab emirates - 2017.06.29 18:55
Products categories
-
Phone
-
E-mail
